4min

Comply with motorcycle emission values with additives

#Motorbike

Is your motorcycle struggling to comply with the required emissions regulations? We will show you how you can cost-effectively solve this problem.

In the passenger car sector, vehicle manufacturers have been recommending the use of fuel additives for several years, especially in the event of starting problems or uneven engine running.

This general recommendation for the use of additives is now also given by motorcycle manufacturers such as BMW: "Fuel additives clean the fuel injection and the combustion area. Fuel additives should be used when refueling with low-quality fuels or for longer idle times," says an excerpt from the BMW R1300GS operator’s manual.

The use of additives in motorbikes can help ensure compliance with the relevant limits in emissions tests.

Rapid improvement through fuel additives

Motorbike 4T Bike-Additive

Show details

Motorbike 4T Bike-Additiveis particularly suitable for this purpose. It cleans the fuel injection and combustion area. It also helps to stabilise petrol and delay its aging. It also offers very good corrosion protection throughout the fuel system and has a cleaning effect. The included lubricant improver ensures long-lasting wear protection for all moving metallic components in fuel and injection systems. For optimum results, Motorbike 4T Bike-Additive should be added every third or fourth tank filling.

Motorbike Speed Additive

Show details

Another additive for cleaning the fuel injection and combustion area is Motorbike Speed Additive. It also has a combustion-accelerating agent which, in combination with the cleaned injection nozzles in the low to medium rpm range, ensures better, more powerful pulling power and thus more elasticity in the engine. The ideal addition for mountain and pass rides, also with touring equipment and/or pillion operation. Motorbike Speed Additive should be added every time you refuel if you want to achieve a sustained improvement in performance. If it's only about cleaning performance, adding it every third to fourth tank filling is sufficient.

Motorbike Gasoline Stabilizer

Show details

Prevention in the event of longer downtimes

For longer idle periods of more than 3 months up to one year, we recommend adding the Motorbike Petrol Stabiliser at a dosage of 5 ml per 1 l of petrol when refueling for the last time. The additive keeps the fuel completely stable for up to a year, provides excellent protection for the entire fuel system against corrosion and counteracts the formation of verdigris. When recommissioning, e.g. after overwintering, the engines start without any fuel-related problems.

Long-term improvement through oil additives

Motorbike Engine Flush

Show details

An engine oil flush using Motorbike Engine Flush removes deposits and combustion residues from the engine, thereby helping to improve engine performance. It is added to the engine oil, which is at operating temperature, before an oil change. Whilst the engine is left to idle for 10 minutes, the additive ensures that deposits and combustion residues are loosened, particularly from the piston rings. The deposits are then drained off with the used oil during the oil change. As a result, the piston rings – now largely free of deposits – can once again seal the combustion chambers much more effectively. Compression and running performance are also improved. Furthermore, oil consumption is kept within tighter limits. All other components in the engine oil circuit also benefit, as the engine oil reaches the cleaned lubrication points unhindered and in the ideal quantity, thereby helping to counteract engine wear more effectively.

Motorbike Oil Additive

Show details

The addition of Motorbike Oil Additive provides an additional seal on the piston rings to the combustion chambers. This helps to maintain the engine. Furthermore, the Motorbike Oil Additive reduces friction and wear, ensures smoother and easier engine running, and counteracts both thermal and pressure stresses on the engine oil.

Motorbike Shooters: Increased performance and perfectly dosed engine protection

Do you want to get the most out of your motorcycle and protect it at the same time? Whether maximum performance with every tank filling or perfect wear protection with every oil change: Our handy Motorbike Shooters offer exactly the right dosage for in-between and without remainders.

Comply with motorcycle emission values with additives

More exciting articles