• 10/11/2022
  • Products

The best way to prepare your vehicle for winter storage

Winter is here: LIQUI MOLY helps your vehicle survive winter and be top fit for spring

For a clean injection system before the onset of winter

The Injection Cleaner for petrol engines removes dirt and deposits from the fuel, injection and combustion system. Simply pour this additive into the fuel tank. The active agents loosen any deposits on the injection nozzles. This means the gasoline is once again finely atomized, combusts more cleanly and less residue is created.

Of course, such a product is also available for diesel, namely as the  Super Diesel Additive. The mtx Carburetor and Valve Cleaner is suitable for older vehicles with carburetors. It removes deposits in the carburettor, on valves and spark plugs and in the combustion chamber, as well as preventing new deposits from forming and the carburettor from icing over. 

Injection Cleaner

  • removes carbon deposits from intake valves and combustion chamber
  • guarantees low fuel consumption
  • optimum dosage
  • reduces pollutant emissions
  • tested for turbochargers and catalytic converters
  • cost-effective due to exact dosage
  • cleans the injection system

Super Diesel Additive

  • excellent cleanliness
  • boosts the cetane number
  • increases the lubricating effect
  • for low-sulfur diesel fuels
  • guarantees low fuel consumption
  • good corrosion protection
  • keeps the fuel system clean
  • high wear resistance
  • tested for the use with catalytic converters
  • optimizes engine performance
  • prevents seizing and the injector needles from gumming up
  • prevents the build-up of deposits
  • keeps injection nozzles clean

Flushing the engine

If your vehicle is ready for an oil change, it’s worth having the engine flushed before the vehicle goes into winter storage to remove any residues of old oil. For this purpose, we recommend using our  Motor Clean This additive is added to the old oil just before it is changed. Its ingredients dissolve sludge and deposits which are then discharged together with the old oil. How? By adding Motor Clean to the motor oil when warm. Then let the motor idle for 10 to 15 minutes and subsequently carry out the oil and oil filter change.

Motor Clean

  • simple to use
  • highly economical
  • does not attack common sealing materials
  • tested for particulate filters and catalytic converters
  • reduces pollutant emissions
  • rapid and effective cleaning
  • gentle cleaning
  • prevents lubrication deficiency
  • tested for turbocharger

Oil change

Flushing an engine and adding new oil will protect the engine against corrosion because deposits are removed from the engine. The old oil could already be worn and may even have turned “acidic”.
These non-neutralized acids attack metals. You can avoid such deposits by using new oil. After all, the engine is the heart of your vehicle and the motor oil is its blood.

You can find the right motor oil for your vehicle easily and quickly with our oil guide.

Protection from ultimate wear

When a vehicle, which has been left to stand for a lengthy period, is started up again, adjacent metal surfaces can come into contact causing serious wear. Metal surfaces can become damaged by friction. This problem can be avoided with our three oil additives to protect against engine wear. What all three have in common: they are all motor oil additives designed to reduce friction. This impacts positively on fuel consumption as well as wear and tear. For example, they protect the engine from early piston seizure in the event of oil loss. Find out here which additive is required and when.

Good to go thanks to top-fit electrics

Corrosion and oxidation are a battery’s number one enemy. Our Battery Clamp Grease has been designed specially for battery poles and connections in vehicle electronics. This grease ensures reliable starting and longer battery life.

Our Electronic Spray makes electronic parts safe. It displaces moisture and is neutral in contact with paints, plastics and rubber.

There is a long list of examples for its use: plug-in and clamp connectors, lamps and fuses, ignition distributors, points, switches, battery poles, alternators, starters and many more besides.

It is also suitable for greasing precision mechanical parts such as door locks, lift mechanisms, rails or Bowden cables.

This will ensure the perfect restart of your vehicle in spring.

Battery Clamp Grease Spray

  • good corrosion protection
  • compatible with plastics
  • prevents leakage currents
  • good electronic properties
  • prevents the contact resistance from increasing during operation and ensures lower loss than with untreated contacts

Electronic Spray

  • good water separation
  • good corrosion protection
  • cleans contaminated contacts
  • silicone-free
  • penetrates layers of oxides and sulphides
  • drives out moisture
  • reduces contact resistance

Fill up with fuel and add additives

It is generally recommended to refuel the vehicle before storing it away for winter. Otherwise, condensation can build up in the tank and it starts rusting from the inside. Our Petrol Stabilizer is also part of the winter treatment. This additive prevents and protects against corrosion.

The Anti-Bacterial Diesel-Additive is highly suitable for preventive use in diesel vehicles that have been decommissioned for lengthier periods of time, such as motor homes. It is particularly suitable for preventing diesel pest. The additive is also ideal for sterilizing already infected tank systems.

Petrol Stabiliser

  • simple to use
  • tested for the use with catalytic converters
  • has a lasting effect
  • protects fuel against oxidation and aging
  • cost-effective due to exact dosage

Anti-bacterial Diesel additive

  • decontaminates infested tank systems
  • reduces pollutant emissions
  • active in preventing bacterial infestation
  • keeps injection nozzles clean
  • improves the lubrication properties
  • prevents expensive repairs