- 02/01/2026
- 1min
February 2026
DPF/GPF Cleaner
Show details
DPF/GPF Cleaner
DPF/GPF Cleaner
Properties
- Application without dismantling the diesel or gasoline particulate filter
- reduces the load on the diesel or gasoline particulate filter
- Allows forced regeneration after clogging
- Dissolves soot deposits
- Non-flammable
- Ash-free formula
- Residue-free evaporation
Application
Before use, make sure particulate filter (PF) temperature is below 40 °C (104 °F). Remove the front temperature or pressure sensor at the PF, then insert spray nozzle through sensor hole and spray short bursts while aiming up-down / side-to-side while holding the can upright. Do not allow the fluid to enter the combustion chamber or turbocharger. Use one full can (400 ml) per application. A suitable scan tool or diagnostic software is necessary to activate manual regeneration to complete the process. Erase eventually stored fault codes and test drive to complete the service. If there are preexisting issues with the diesel particulate filter, LIQUI MOLY Pro-Line Diesel Particulate Filter products and equipment should be used (see catalog).
