JetClean-apparat Plus

SKU: P000081

For rask og lettvint rengjøring av injeksjonssystemer for bensin og diesel. Trykkbeholderen har et rominnhold på 5 l rengjøringsvæske. Leveres med JetClean Plus universal-adapter sett (art.nr. 7911). Ytterligere tilbehør som JetClean Plus utvidelsesadaptersett (art.nr. 7087), JetClean adaptersett 1-32 M1 (art.nr. 8263), JetClean adaptersett ... Learn More

For rask og lettvint rengjøring av injeksjonssystemer for bensin og diesel. Trykkbeholderen har et rominnhold på 5 l rengjøringsvæske. Leveres med JetClean Plus universal-adapter sett (art.nr. 7911). Ytterligere tilbehør som JetClean Plus utvidelsesadaptersett (art.nr. 7087), JetClean adaptersett 1-32 M1 (art.nr. 8263), JetClean adaptersett M2, JetClean adaptersett P1 er tilgjengelig valgfritt.

Egnet for alle bensin- og dieselmotorer. Spesielt utviklet til bruk med Pro-Line JetClean-additiver fra LIQUI MOLY.

Application

Connect the device to the vehicle according to the vehicle type and injection system. Pour at least 2 l of the corresponding Pro-Line JetClean cleaning fluid for gasoline or diesel vehicles into the tank of the device. Clean the tank with Pro-Line JetClean Fuel Tank Cleaner (Part no. 5137) before changing the cleaning fluid from gasoline to diesel or vice versa. Depending on the vehicle, charge the device tank with the system pressure required for cleaning. The pressure can be controlled either manually using the hand pump or through the compressed air system with the aid of the compressed air connection provided. Open the ball valve located on the hoses according to the connection and vehicle type and start the engine. Leave the vehicle to idle for about 10 minutes in order to allow the dirt in the injection system and at the intake valves to soak into the fluid. Then run the engine at higher speed (2,000-3,000 rpm) and depress the throttle fully for a short while every so often. The pressure fluctuations this causes will help to remove stubborn dirt. The cleaning process takes about 30-45 minutes, depending on the level of contamination. Then return the vehicle to its original condition, check for leaks and carry out a test drive of at least 10 km.
Note: Make sure when attaching and removing the device to and from the vehicle that the fuel and the cleaning fluid do not ignite on heat sources and that the lines of the device are not in direct contact with any heat sources such as the exhaust system during cleaning.
SKU
Informations
Container type
Container contents
Language line
PU
Pallet unit
Container type: Kartong
Container contents: 1 Stk
Language line: D-GB-I-E-P-RUS
PU: 1
Pallet unit: 56

produktinformasjon

Sikkerhetsdatablad

Bilder og grafikk

Motor oils - Made in Germany

BestBrandLogos
Din vurdering Din vurdering
Vennligst skriv inn navnet ditt
(Optional)
(Optional)
Vennligst oppgi en Vaild -e -post
Vennligst oppgi et sammendrag
Vennligst oppgi en beskrivelse for vurderingen

In order to be able to respond to your feedback and improve our service as a result, we will contact you in individual cases, if necessary, with individual queries and always with a request for confirmation of your rating at the e-mail address you provided (Art. 6 (1) lit. f DSGVO).

Din mening er viktig for oss!

Sett i gang nybrottsarbeid og vurder produktet, slik at andre kan dra nytte av din erfaring og vi alltid kan forbedre oss!
Kari Nordmann 30.09.2022
Integer aliquam sollictudin tortor, ac pretium risus rutrum at. Curabitur nec iaculis lectus, vitae blandit tellus.
Kari Nordmann 30.09.2022
Integer aliquam sollictudin tortor, ac pretium risus rutrum at. Curabitur nec iaculis lectus, vitae blandit tellus.
Forretningskunder
Kontakt våre eksperter nå. Finn den rette kontaktpersonen i ditt område.
Private kunder
Finn passende forhandlere i ditt område. Rask og enkelt med vårt leveringskilde -søk.