Tire Repair Spray
- subsequent tire repair possible
- simple to use
- suitable for all common passenger car tire sizes
- rapid remedy for punctures without dismantling
Application
1. Remove the cause of the puncture (e.g. nail, screw) if possible, then turn the wheel so that the damaged section is at the bottom and let out all of the air.
2. Shake bottle well. If cold, warm it up (vehicle heater).
3. Screw the connector onto the tire valve.
4. Hold bottle vertically as much as possible and release the entire contents.
Note:
Immediately drive at a moderate speed for 10 – 15 km so that the product can optimally distribute itself on the tire surface. Then correct the tire pressure. Do not forget to go to a workshop to have the tire professionally repaired.
Other information
IMPORTANT: Tire pressure monitoring systems in tires can be destroyed by the solvents contained in the product.Product Information
Safety data sheets
Images and documents