Oil & Chemical Binding Agents
Application
Particularly with large-area applications, unknown liquids or mixtures, first check the compatibility of the absorbing liquid. Apply the granulate in a layer that is about 5 mm thick on the liquid to be removed and remove after sufficient time for the product to take effect. The absorption effect can be improved and accelerated by sweeping back and forth with hard broom.Suitable for use in conventional spreaders. When pouring, please make note of the direction and strength of the wind as well as general protective measures. In addition, mind the ignition hazards resulting from electrostatic charge.
According to the declaration by the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety dated 3/12/1990 in GMBI no. 18 p. 337, sufficient cleaning of traffic areas requires at least two applications of binders and subsequent cleaning with a 1 % wetting agent solution and water. The wetting agent solution must be disposed of through reabsorption, where possible.
For disposal measures following use, note the relevant regulations and legal specifications valid for the absorptively bound substance.
Product Information
Safety data sheets
Images and documents