A/C System Cleaner (Spray)

Portion pack:
One pack will treat one vehicle or one air conditioning system. If the manufacturer of the air conditioning system provides a cleaning service recommendation, this recommendation must be observed. If no model-specific instructions are available from the passenger car manufacturer, follow our recommendation for application. If possible, spray the cleaning fluid directly onto the surface of the evaporator of commercial vehicle, bus and home A/C systems.

LIQUI MOLY recommended use:

• Keep the window open during the cleaning process. Avoid inhaling the vapors during cleaning.
• Check to make sure that the condensation water drainage openings are not blocked.
• Dry the evaporator surface for 10 minutes with the engine running, using the following heating and ventilation settings: switch off the air conditioning and select recirculation mode. Set the air distribution switch to footwell. Turn the temperature regulator and blower selector to maximum.

Cleaning the air-conditioning system:

• Insert the cleaner probe towards the evaporator (towards the centre of the vehicle).
• Actuate the cleaner and move the spray probe carefully back and forth to flush out and clean the evaporator thoroughly.
• Allow 15 - 20 minutes for the cleaning fluid to take effect.
• Dry the surface of the evaporator for 10 minutes with the heater and blower at the same setting as prior to cleaning.
• Replace the dust and pollen filter.

Note: Wipe up any cleaner that may have leaked out using a damp cloth and water.