Lasting, thixotropic and rapid drying corrosion protection based on special bitumen/wax additives. After evaporation, a highly adherent, tough and resilient film remains which provides protection against environmental effects, corrosion and stone chipping.
For coating bare and painted surfaces, primarily on vehicle underbodies, and for touching up or supplementing existing coatings.
Clean the surfaces to be treated thoroughly in advance and remove rust. The surfaces must be dry and free of wax, dirt and grease and extensively free of dust. Shake well before use! Can be applied with the UBS Spray Gun (part no. 6219) or the Compressed Air Can Gun (part no. 6220) at an operating pressure of 3 – 4 bar depending on the desired spray pattern. The ideal spraying distance is approx. 30 cm. Can be applied without mist, no stringing and does not drip.
Recommended application temperature: 15 – 25 °C
We recommend applying thin coats. Depending on the desired layer thickness, intermediate drying should be carried out after each layer.
Do not leave containers standing open as the material will form a skin on the surface.
Can sheet metal
Safety data sheets
Images and graphics