Motorbike Foam Filter Cleaner
- excellent cleaning effect
- biologically degradable
- economical to use
- cleans efficiently and gently
- excellently dissolves dust, dirt and grease
- economical to use
- does not contain flammable solvents or hazardous substances
Application
Place filter in suitable vessel. Mix cleaner with water. Depending on the degree of contamination, the dosage must be between 1:5 and 1:10 (1 part cleaner to 5-10 parts water). Plunge the filter entirely into the cleaning solution and allow to work for 5-10 minutes. Then carefully knead the filter in the solution until it is completely clean both inside and outside. Do not under any circumstances wring the filter out, as this could cause damage. Then rinse the filter out under fresh water until the cleaner has been flushed out completely. If any stubborn contamination remains, repeat the process if necessary. Allow the filter to dry in the ambient air before installation. Then wet with LIQUI MOLY Motorbike Air Filter Oil.Other information
Wear suitable gloves (e.g. disposable gloves) when using. Oil residues remaining in the air filter is normal, even desired. The air filter should only be cleaned of dust, dirt and grease.Product Information
Safety data sheets
Images and documents