Glass Sealing Compound; can be dapped off
- sealant
- odorless
- outstanding compatibility with paint
- high tackiness
- non-hardening
- cannot be painted over
Application
The surfaces to be sealed must be clean, dry and free of grease. The glazing sealant is applied by spotting using a hand or a compressed-air cartridge gun. A pressure of around 2-3 bar must be used if applied using compressed air. Inject Spotting Glazing Sealant into the joints, ridges and gaps, etc. and, if necessary, smooth it down. After a brief flash-off time, excess material can be dabbed off using itself or an adhesive tape.Product Information
Safety data sheets
Images and documents