Liquifast 1402 (Bag-set)
1 x Liquifast 1402, 400 ml
1 x Liquiclean, 30 ml
1 x Active Primer, 10 ml Stick
1 x nozzle
1 x adapter for Flexpack
1 x disposable gloves
1 x instructions for use Learn More
- single-component
- proven OEM quality
- high viscosity
- cold working
- fast bonding properties
- TÜV tested
- cured by moisture in the air



-
Danger
- H225 Highly flammable liquid and vapour.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H336 May cause drowsiness or dizziness.
- EUH204 Contains isocyanates. May produce an allergic reaction.
1 x Liquifast 1402, 400 ml
1 x Liquiclean, 30 ml
1 x Active Primer, 10 ml Stick
1 x nozzle
1 x adapter for Flexpack
1 x disposable gloves
1 x instructions for use
Application
1. CleanerThe bonding surfaces must be dry and free of oil, dust, grease and other contamination residues. The glass surface or ceramic coating is cleaned with Liquiclean or Cleaner and Thinner (part no. 6130) and then with Windshield Cleaner Foam (part no. 1512), as are the bodywork flange or newly painted body components. We recommend also cleaning the remaining adhesive beading that has been trimmed back with Liquiclean or Cleaner and Thinner. Before applying the sealant or bonding the window, the cleaned bonding surface must be completely dry.
2. Priming/activation of pre-coated windows
Active Primer is required for adhesive pre-treating during window bonding. The Active Primer is included in the set as a 10 ml stick. Shake Active Primer well for at least 45 seconds before use. Active Primer can be applied universally in the bonding area thinly and evenly (approx. 0.05 mm wet-film thickness) on the cleaned glass surface or ceramic screen printing, on the clean paint surface of newly painted car-body components, on remaining adhesive beadings that have been trimmed back and pre-coated windows (PUR and RIM coatings). The primed surface must flash off for approx. 15 minutes before the windshield adhesive is applied.
If the remaining adhesive beading was cut back more than 6 hours ago, pre-treatment with Active Primer is specified as binding.
Motor oils - Made in Germany
For decades now, brand oil made in Germany! See here what awards we have already received
