LM 203 MoS2 Anti-Friction Lacquer
SKU:
P000598
Rapid drying, resin-bound MoS2 anti-friction lacquer dispersed in solvent. Produces an adherent film of dry lubricant with low friction values.
Learn More
-
Danger
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H319 Causes serious eye irritation.
Rapid drying, resin-bound MoS2 anti-friction lacquer dispersed in solvent. Produces an adherent film of dry lubricant with low friction values.
Used for pre-treatment of drive elements under heavy load such as gearwheels, racks, profiled shafts and joints. For lubrication during the assembly of press fittings and for treatment of work pieces and tools during metal forming and metal processing.
Application
Surfaces to be coated must be bare metal, free from grease and dry. Lightly roughening the surface by sand blasting, grinding with emery, pickling or phosphating will produce the optimum service life for the film. Application from aerosol can (recommended layer thickness 5 – 15 µm). Drying time depends on the temperature.Other information
Note: After use, clear aerosol can spray nozzle (hold can with spray head upside down) by spraying until only pure propellant emerges.SKU
Informations
Container type
Container contents
Language line
PU
Pallet unit
Container type:
Can aerosol
Container contents:
300 ml
Language line:
DE-EN
PU:
12
Pallet unit:
1512
Product Information
Safety data sheets
Images and documents
Older versions of the safety data sheet are available
upon request via the email address info@liqui-moly.de.
