Liquifast 1502
SKU:
P001451
1K-PUR window repair set, high-modulus, non-conductive. For the new vehicle generation. Prevents contact corrosion in aluminum bodies. Cold processing. TÜV approved. OEM quality. Very fast hardening properties. Use in connection with a primer system. Drive-away time: With airbag 1.0 hour, Dual airbag 1.0 hour.
Learn More
- proven OEM quality
- high-modulus
- high viscosity
- cold working
- non-conductive
- fast bonding properties
- TÜV tested
- cured by moisture in the air
-
Danger
- H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- EUH204 Contains isocyanates. May produce an allergic reaction.
-
Danger
- H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- EUH204 Contains isocyanates. May produce an allergic reaction.
1K-PUR window repair set, high-modulus, non-conductive. For the new vehicle generation. Prevents contact corrosion in aluminum bodies. Cold processing. TÜV approved. OEM quality. Very fast hardening properties. Use in connection with a primer system. Drive-away time: With airbag 1.0 hour, Dual airbag 1.0 hour.
For gluing windshields, rear and side windows on vehicles. Can also be used if the manufacturer requires a high modulus and/or non-conductive pane adhesive, e.g. for glass-integrated antennas and heaters.
Application
1. Cleaning agentThe surfaces to be bonded have to be dry and free of oil, dust, grease and other dirt residues. The glass surface or the ceramic coating has to be cleaned with Liquiclean or cleaning and diluting agent, Item No. 6130, and then with the glass-cleaning foam Item No. 1512. Also the car body flange or the newly painted car body parts are to be cleaned that way. We recommend cleaning the cut back residual adhesive bead with Liquiclean or cleaning and diluting agent as well. Before the sealant is applied, or before the glass surface is bonded, the cleaned holding surface has to have dried completely.
2. Priming / activation of pre-coated glass panes
Active Primer is necessary for the priming of the holding surface, when glass panes are to be bonded. The Active Primer is included in the delivery of the glass pane repair set as 10 ml stick. Prior to use, shake Active Primer well for at leas 45 sec. Within the bond area, Active Primer can universally be applied on the cleaned glass surface or the ceramics silk screen, on the clean painted surface of newly painted parts of the car body, on the cut back residual adhesive beads, as well as on pre-coated glass panes (PUR and RIM coating). Apply Active Primer sparsely and uniformly (wet film has to have a thickness of approx. 0.05 mm). The primed surface has to dry for approx. 15 minutes before the glass adhesive is applied.
If the residual adhesive bead has been cut back more than 6 hours ago, a pre-treatment with Active Primer is mandatory.
SKU
Informations
Container type
Container contents
Language line
PU
Pallet unit
Container type:
Bag aluminum
Container contents:
400 ml
Language line:
D-GB-F-I-E-NL-P
PU:
12
Pallet unit:
756
Container type:
Cartridge aluminum
Container contents:
310 ml
Language line:
D-GB-P-I
PU:
12
Pallet unit:
1152
Motor oils - Made in Germany
For decades now, brand oil made in Germany! See here what awards we have already received
