Liquifast 1502 (Cartridge-set)

Top product Top product
SKU: P001452
Cartridge set consisting of:
1 x Liquifast 1502, 310 ml
1 x Liquiclean, 30 ml
1 x Active Primer, 10 ml stick
1 x nozzle
1 x disposable gloves
1 x instructions for use
Learn More
  • proven OEM quality
  • high-modulus
  • high viscosity
  • cold working
  • non-conductive
  • Show more
ghs02 ghs07 ghs08
    Danger
  • H225 Highly flammable liquid and vapour.
  • H317 May cause an allergic skin reaction.
  • H319 Causes serious eye irritation.
  • H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
  • H336 May cause drowsiness or dizziness.
  • EUH204 Contains isocyanates. May produce an allergic reaction.
Cartridge set consisting of:
1 x Liquifast 1502, 310 ml
1 x Liquiclean, 30 ml
1 x Active Primer, 10 ml stick
1 x nozzle
1 x disposable gloves
1 x instructions for use
For bonding front, rear and side windows on vehicles. Can also used if the manufacturer requires a high modulus and/or non-conductive windshield adhesive, e.g. with antennas and heaters integrated into the glass.

Application

1. Cleaner
The surfaces to be bonded must be dry, free from oil, dust, grease and other dirt residues. The glass surface or ceramic coating is cleaned with Liquiclean or Cleaner and Thinner (part no. 6130) and then with Windshield Cleaner Foam (part no. 1512), as are the bodywork flange or newly painted body components. We recommend also cleaning the remaining adhesive beading that has been trimmed back with Liquiclean or Cleaner and Thinner. Before applying the sealant or bonding the window, the cleaned bonding surface must be completely dry.

2. Priming/activation of pre-coated windows
Active Primer is required for adhesive pre-treating during window bonding. The Active Primer is included in the set as a 10 ml stick. Shake Active Primer well for at least 45 seconds before use. Active Primer can be applied universally in the bonding area thinly and evenly (approx. 0.05 mm wet-film thickness) on the cleaned glass surface or ceramic screen printing, on the clean paint surface of newly painted car-body components, on remaining adhesive beadings that have been trimmed back and pre-coated windows (PUR and RIM coatings). The primed surface must be allowed to air off for about 15 min. before applying the windshield adhesive.
If the remaining adhesive beading was trimmed back more than 6 hours ago, pre-treatment with Active Primer is mandatory.

SKU
Informations
Container type
Container contents
Language line
PU
Pallet unit
Container type: Carton
Container contents: 1 pc
Language line: D-GB-P
PU: 12
Pallet unit: 252

Product Information

Safety data sheets

Images and documents

Motor oils - Made in Germany

BestBrandLogos
Your Review Your Review
Please provide a rating
Needs improvement Different than expected OK Good Very good
Please enter your name
(Optional)
(Optional)
Please provide a vaild email
Please provide a summary
Please provide a description for the rating
This is a required field.

In order to be able to respond to your feedback and improve our service as a result, we will contact you in individual cases, if necessary, with individual queries and always with a request for confirmation of your rating at the e-mail address you provided (Art. 6 (1) lit. f DSGVO).

Your opinion is important to us!

Be a trailblazer and rate the product, so that others can benefit from your experience and we can keep on optimising!
Jane Doe 13.06.2024
Your opinion is important to us! Be a pioneer and rate the product so that others can benefit from your experience and we can always optimize!
Jane Doe 13.06.2024
Your opinion is important to us! Be a pioneer and rate the product so that others can benefit from your experience and we can always optimize!
Business customers
Contact our experts now. Find the right contact person in your area.
Private customers
Find suitable dealers in your area. Quick and easy with our supply source search.