Active Primer
SKU:
P001458
Physically and chemically dying black primer that contains solvents and ensures adhesion between glass/ceramic and the windshield adhesive, while also providing UV protection. The product contains less than 0.1 wt. % of isocyanates and is thus not subject to any training obligation under the REACH Regulation.
Learn More
- accelerated adhesion build-up
- satisfies OEM requirements
- extremely high UV resistance
- good corrosion protection
- bonding agent for glass and ceramic screen printing
- bonding agent for paints
- bonding agent for residual PUR beading
- bonding agent for PUR base coats
- bonding agent RIM coatings
- NCO-konform
-
Danger
- H225 Highly flammable liquid and vapour.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness or dizziness.
- EUH066 Repeated exposure may cause skin dryness or cracking.
- EUH204 Contains isocyanates. May produce an allergic reaction.
-
Danger
- H225 Highly flammable liquid and vapour.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness or dizziness.
- EUH066 Repeated exposure may cause skin dryness or cracking.
- EUH204 Contains isocyanates. May produce an allergic reaction.
Physically and chemically dying black primer that contains solvents and ensures adhesion between glass/ceramic and the windshield adhesive, while also providing UV protection. The product contains less than 0.1 wt. % of isocyanates and is thus not subject to any training obligation under the REACH Regulation.
For priming glass, ceramic screen printing and paints and as a PU activator for residual PUR beading, PUR base coats (PAAS) and RIM sheathings (e.g. PVC, PUR).
Application
Before application, make sure that the bonding surface is clean and free of grease. We recommend cleaning with Liquiclean or Cleaner and Thinner in the bonding area of the bodywork flange as well as the windshield and for the ceramic screen printing. Additional cleaning with Windshield Cleaner Foam is required to remove all contaminants. Shake the primer well before use (at least 45 s after the steel balls have worked free in the case of aluminum cans). With the 10 ml stick, after shaking immediately screw on the sponge head and apply/process.Attention: Product is moisture-sensitive! Remaining contents of sticks and 30 ml containers are to be disposed of after being used once. 100 ml containers which have been opened must be closed immediately after extracting contents and used within 3 days.
Product Information
Safety data sheets
Images and documents
Product Information
Safety data sheets
Images and documents
