Liquimate 8200 MS Polymer black
SKU:
P001433
High-quality 1-component sealant which cures by means of the humidity in the air to form a permanently flexible adhesive sealant. Free of solvents and isocyanates. OEM quality. Resistant to salt water. Fade-free, weather-resistant and resistant to UV and mineral oil. With most commercially available paints, can be painted over wet-on-wet immediatel ...
Learn More- excellent resistance to weathering
- good adhesion
- easy to use
- does not contain solvent, isocyanate or silicones
- resistant to mineral oils
- permanently elastic after curing
- can be painted over wet-in-wet
- EUH208 Contains Trimethoxyvinylsilane, Reaction mass of: bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate and methyl-1,2,2,6,6-pentamethyl-4-piperidyl sebacate, N-(3-(trimethoxysilyl)propyl)ethylenediamine. May produce an allergic reaction.
- EUH210 Safety data sheet available on request.
High-quality 1-component sealant which cures by means of the humidity in the air to form a permanently flexible adhesive sealant. Free of solvents and isocyanates. OEM quality. Resistant to salt water. Fade-free, weather-resistant and resistant to UV and mineral oil. With most commercially available paints, can be painted over wet-on-wet immediately (max. up to 2 h).
Suitable for sealing and bonding in case of repair. For visible seams and normal seams. Use as base material for Liquimate 8300.
Application
Bonding surfaces must be clean and free of dust and grease.Pre-treatment:
No primer for non-porous bonding surfaces. It is advisable to carry out an adhesion test on each substrate first.
Clean bonding surfaces with Cleaner and Thinner (part no. 6130).
Note on working with adhesive sealants:
In general, the material is ready to be painted over following skin formation time.
With most commercially available paints, can be painted over wet-on-wet immediately (max. up to 2 h). Preliminary tests recommended or required. The overcoating of the sealant reduces the access of air humidity and thus hinders the curing process. The maximum permissible movement absorption is usually limited by the paintwork.
SKU
Informations
Container type
Container contents
Language line
PU
Pallet unit
Container type:
Cartridge plastic
Container contents:
290 ml
Language line:
D-GB-F-I-E-NL-P
PU:
12
Pallet unit:
1008
