Liquifast 9000 (Bag-set)

SKU: P003257
Bag set consisting of:
1 x Liquifast 9000, 400 ml
1 x Liquiclean, 30 ml
1 x Active Primer, 10 ml stick
1 x nozzle
1 x adapter for Flexpack
1 x disposable gloves
1 x instructions for use
Learn More
Bag set consisting of:
1 x Liquifast 9000, 400 ml
1 x Liquiclean, 30 ml
1 x Active Primer, 10 ml stick
1 x nozzle
1 x adapter for Flexpack
1 x disposable gloves
1 x instructions for use
For the bonding of windshields, rear windows and side windows to vehicle bodies (passenger vehicles, trucks, the drivers' cabins of tractors and forklift trucks and special vehicles).

Application

1. Cleaner
The surfaces to be bonded must be dry, free from oil, dust, grease and other dirt residues. The complete pane must be cleaned on the inside with our Windshield Cleaner Foam (part no. 1512). Then clean the bonding area with Liquiclean (part no. 6186) or Cleaner and Thinner (part no. 6130), as well as the body flange and newly painted body parts. We recommend also cleaning the remaining adhesive beading that has been trimmed back with Liquiclean or Cleaner and Thinner. Before applying the sealant or bonding the window, the cleaned bonding surface must be completely dry.

Note: To enable optimum adhesion to the body flange, we recommend cleaning the body flange thoroughly before trimming back. Cut back the remaining bead as far as possible.


2. Priming/activation of pre-coated windows
Active Primer is required for adhesive pre-treating during window bonding. The Active Primer is included in the scope of delivery of the Window Repair Kit as a 10 ml stick. Shake Active Primer well for at least 45 seconds before use. Active Primer can be applied universally in the bonding area thinly and evenly (approx. 0.05 mm wet-film thickness) on the cleaned glass surface or ceramic screen printing, on the clean paint surface of newly painted car-body components, on remaining adhesive beadings that have been trimmed back and pre-coated windows (PUR and RIM coatings). The primed surface must be allowed to air off for at least 10 min. (23 °C/ 50 % RH) applying the windshield adhesive. If the residual adhesive bead was cut back more than 6 hours ago, pre-treatment with Active Primer is mandatory.

The application recommendations can be found in the enclosed brochure!

SKU
Informations
Container type
Container contents
Language line
PU
Pallet unit
Container type: Carton
Container contents: 1 pc
Language line: D-GB-F-I-E-NL-P
PU: 12
Pallet unit: 252

Product Information

Safety data sheets

Images and documents

Motor oils - Made in Germany

BestBrandLogos
Your Review Your Review
Please provide a rating
Needs improvement Different than expected OK Good Very good
Please enter your name
(Optional)
(Optional)
Please provide a vaild email
Please provide a summary
Please provide a description for the rating
This is a required field.

In order to be able to respond to your feedback and improve our service as a result, we will contact you in individual cases, if necessary, with individual queries and always with a request for confirmation of your rating at the e-mail address you provided (Art. 6 (1) lit. f DSGVO).

Your opinion is important to us!

Be a trailblazer and rate the product, so that others can benefit from your experience and we can keep on optimising!
Jane Doe 12.04.2024
Your opinion is important to us! Be a pioneer and rate the product so that others can benefit from your experience and we can always optimize!
Jane Doe 12.04.2024
Your opinion is important to us! Be a pioneer and rate the product so that others can benefit from your experience and we can always optimize!
Business customers
Contact our experts now. Find the right contact person in your area.
Private customers
Find suitable dealers in your area. Quick and easy with our supply source search.