Screw-Retainer Fine Mechanics
- resistant to stresses and vibrations
- can be used on oily surfaces
- wide operating temperature range
- rapid curing
- prevents leaks
- controlled torque/stress ratio
- EUH208 Contains Diisopropylbenzene hydroperoxide. May produce an allergic reaction.
- EUH210 Safety data sheet available on request.
Application
Apply the product uniformly to screws and nuts. The paste cures in the absence of air (anaerobic).One must differentiate between active and passive materials during the curing time.
Active materials generally refer to metals with a high iron or copper content (e.g. iron, steel, copper, brass, bronze). Active materials ensure rapid curing.
Passive materials such as high-alloy (stainless) steel, zinc, aluminum or plastics only cure very slowly or only with the help of an activator.
Other information
Due to the anaerobic properties, there must always be enough air in the bottle. Otherwise the adhesive could harden prematurely. The bottle should therefore only be filled up to about 1/3. However, the quantity always corresponds to the content indicated on the container.Product Information
Safety data sheets
Images and documents