Oil cabinet

Material: Steel sheet powder-coated in anthracite or aluminum-silver look, 2 shelves (1 shelf optional), drip tray in galvanized sheet steel, brochure compartment in the right-hand door. Doors are lockable.

Weight: 116 kg

Dimensions: Height: 2100 mm Width: 950 mm Depth: 550 mm

Oil cabinet contents:
1 x Product catalog (part no. 5452)
1 x Workshop solutions (part no. 5575)
1 x Oil guide for cars (part no. 5430)
1 x Oil guide for commercial vehicles (part no. 5431)
1 x overview of special oils (part no. 5635)
1 x order form for additional labels
3 x additional labels 20 l
1 x environmental certificate
1 x transparent measuring beaker 1 l

The cabinet is delivered fully assembled.

The right oil for every vehicle – all oil specialties neat and organized in the LIQUI MOLY oil cabinet!
 

  • Specially developed for the new LIQUI MOLY 20-liter canister.
  • This allows you to store the usually smaller quantities of valuable special oils safely and clearly.
  • Offset shelves prevent dripping onto the lower levels.
  • Integrated oil drip pan, so that there are no problems with authorities.
  • Lockable, i.e. no more “oil loss”.
  • Document compartments integrated into the door, e.g. for technical data sheets.

The following content is available:

  • 8 x 20-liter canisters and 2 x 60-liter drums. The cabinet then contains 2 shelves, 8 drain cocks (part no. 7924) and 2 hand pumps for 60-liter drum (part no. 7932).

    or
     
  • 12 x 20-liter canisters. The cabinet then contains 3 shelves and 12 drain cocks (part no. 7924).

Available for free in conjunction with an appropriate oil order and purchase volume (based on a license and use agreement). For more details, get in touch with your responsible sales representative.

Gear oil cabinet

  • The LIQUI MOLY gear oil cabinet is an in-house development and is produced exclusively for LIQUI MOLY customers.
  • The body, doors and internal dividers are made of high-quality, powder-coated sheet steel, in aluminum-silver or anthracite color.
  • The cabinet also has 1 pull-out oil drip tray, 3 drain cocks, 1 holder for 1 manual metering syringe (part no. 7989) and 2 storage compartments for extra labels, oil guide, etc. on the inside of the right-hand door.
  • Drill holes and reinforcement plates on the rear panel for wall fixing.

Weight: 52 kg

Dimensions (H x W x D): 950 x 630 x 550 mm

Available for free in conjunction with an appropriate oil order and purchase volume (based on a license and use agreement). For more details, get in touch with your responsible sales representative.

The following content is possible:

3 x 20-liter containers, 3 x 6-pack of the 1-liter gear oil bottle

Motorbike Oil Cabinet

  • The Motorbike oil cabinet was specifically designed for 20-liter and 1-liter LIQUI MOLY containers.
  • Sturdy design, made from powder-coated steel plate for wall mounting.
  • Ideal for the safekeeping of Motorbike motor and transmission oils.
  • With integrated oil sump and document compartment for technical data sheets.

Weight: 52 kg

Dimensions (H x W x D): 950 x 630 x 550 mm

Available for free in conjunction with an appropriate oil order and purchase volume (based on a license and use agreement). For more details, get in touch with your responsible sales representative.

The following content is possible:

3 x 20-liter containers, 3 x 6-pack of the 1-liter motorcycle oil canisters

chemical Cabinets

For optimum storage of chemical products

Steel cabinets especially developed by LIQUI MOLY; extremely stable version. Ideal for professional use in workshops with practical subdivisions. All cabinets are already prepared for wall installation. Doors can be secured with bale lock to prevent "disappearance". All three cabinets are available separately and free of charge in conjunction with a license and use agreement.

Weight: 23.5 kg each

Dimensions (H x W x D): 950 x 450 x 320 mm

(part no. 7973)

As a service product cabinet
When aerosol cans are overheated, e.g. from exposure to sun or fire, there is a danger of the aerosol cans bursting. In addition to the hazard posed by parts of the spay can, other highly combustible substances are released, which can lead to aggravation of the fire or even explosion. For this reason, it is sensible in everyday workshop practice to store used aerosol cans in the LIQUI MOLY service product cabinet to counteract such hazards.

As an additive cabinet
For storing LIQUI MOLY additives of the Pro-Line series that are used in the workshop.

As an “adhesives and sealants” cabinet
Adhesives, sealants and other chemical products for corrosion protection and car glass service can be stored safely and neatly in this cabinet.