Special set with glue cartridge and special fleece. Outstanding unequal thermal expansion equalization.
Developed for gluing rear-view mirror feet made of metal to windshields and for hinges on vent side-windows.
The bonding surfaces must be dry and free of dirt, grease and oil residues. For cleaning, we recommend LIQUI MOLY Cleaner and Thinner (part no. 6130). The impregnated nylon grid is used as a bonding agent and should be trimmed to the size of the area to be bonded. Next, hold the component to be bonded on the surface of the glass and mark the desired position. Now apply the adhesive to the component to be bonded and place the grid on top. The component is then attached to the marked glass surface and held there with slight pressure for approx. 2 min. The mirror can be mounted on the base after approx. 15 minutes. The adhesive is fully dry after approx. 24 hours.
Safety data sheets
Images and graphics