Wähle ein anderes Land oder eine andere Region, um Inhalte für deinen Standort zu sehen. Select another country or region to see content for your location. Seleccione otro país o región para ver el contenido de su ubicación. Selecteer een ander land of een andere regio om de inhoud van uw locatie te zien. Vælg et andet land eller område for at se indhold, der er specifikt for din placering. Voit katsoa paikallista sisältöä valitsemalla jonkin toisen maan tai alueen. Choisissez un pays ou une région pour afficher le contenu spécifique à votre emplacement géographique. Επίλεξε μια άλλη χώρα ή περιοχή, για να δεις περιεχόμενο σχετικό με την. Scegli il Paese o territorio in cui sei per vedere i contenuti locali. 別の国または地域を選択して、あなたの場所のコンテンツを表示してください。 Velg et annet land eller region for å se innhold som gjelder der. Escolha para ver conteúdos específicos noutro país ou região. Välj ett annat land eller område för att se det innehåll som finns där. Konumunuza özel içerikleri görmek yapmak için başka bir ülkeyi veya bölgeyi seçin. Chọn quốc gia hoặc khu vực khác để xem nội dung cho địa điểm của bạn

Diese Box wird angezeigt, da die Seitensprache nicht mit einer den Browsersprachen übereinstimmt.

Close




Motor oil: mineral, synthetic or fully synthetic?

German oil specialist LIQUI MOLY explains the differences and reveals what is really important

July 2020 – Motor oil has developed from a simple lubricant to a high-tech liquid. At the same time, the number of oil grades and specifications has increased significantly. Oliver Kuhn, deputy head of the oil laboratory at LIQUI MOLY, provides more insight and explains what really matters.

 

What kind of oils are there?

Oliver Kuhn: Motor oils can be roughly divided into two categories: mineral-based and synthetic oils. Mineral oils are becoming less and less important for cars because they do not offer such high performance. Modern engines demand much more from the oil than old engines. Only synthetic oils can meet these requirements.

So synthetic oils are the better oils?

Oliver Kuhn: Yes, but you can also mix a mineral oil with a synthetic oil. However, such semi-synthetic oils are playing an increasingly smaller role in the market, because their performance is not high enough, due to their mineral content.

Sounds complicated. But then, at least, all synthetic oils are similar?

Oliver Kuhn: Unfortunately, no. There are two different ways in which synthetic oils can be produced. By one of these methods, a so-called PAO oil is obtained at the end. This is the classic synthetic oil as it came on the market in the 1970s. It is chemically very pure and therefore very effective, but also very expensive to produce. With the other approach, the oil is produced by hydro-cracking, which is why these oils are also called HC oils in technical jargon. HC oils are more modern and came up in the 1990s. Today, they offer the best possible performance for all modern engines.

Should I rather use a PAO oil or an HC oil?

Oliver Kuhn: This choice is often not even available. Almost all oil development nowadays takes place on the basis of HC oils. Many oil specifications can only be met with HC oils.

How can I tell what kind of synthetic oil it is?

Oliver Kuhn: That is not so easy, because there are no uniform terms here. In the USA, for example, both PAO oils and HC oils can be described as fully synthetic, but in Germany only PAO oils may be called synthetic. That is why we give our HC oils the label “Synthesis Technology”. Other oil manufacturers use terms such as “100% synthetic” or “synthetic mix”, where it is not clear what exactly is meant.

That is quite confusing.

Oliver Kuhn: True. But the question of which synthetic oil is actually meant in a particular case is of no importance to drivers and workshops. It is not about which oil is supposedly better. The decisive factor is that the oil meets the specifications which the car manufacturer has set for that model. This is given in the manual of the car, or you can use our free Oil Guide at www.liqui-moly.com.

So if the specification is right, it doesn’t matter whether it’s a PAO oil or an HC oil?

Oliver Kuhn: Correct. In any case, the additive packages are becoming increasingly important. Today, they are the most important component of a motor oil besides the actual oil. They provide a large part of the motor oil’s performance. With some very modern motor oils, the base oil is hardly more than just the carrier fluid for the additive packages.

So why are there always discussions about which synthetic oil is the better one?

Oliver Kuhn: This is an echo from the past. When the first HC oils appeared 30 years ago, the quality difference to PAO oils was even greater. But that was a long time ago. No expert would have such a discussion today.

Peter Szarafinski


Marketing
Peter Szarafinski
Head of Media Relations International
Jerg-Wieland-Straße 4
89081 Ulm

Telephone: +49 731 1420-189
Fax: +49 731 1420-82
Email: peter.szarafinski@liqui-moly.de

Contact

USA

Europe

Bosna i Hercegovina
Czechia
Danmark
Deutschland
Eesti
España
France
Great Britain
Hrvatska
Ireland
Italia
Kosovë
Latvija
Lietuva
Magyarország
Nederland
Norge
Österreich
Polska
Portugal
Schweiz
Slovensko
Srbija
Suomi
Sverige
Türkiye
Ελλάδα
Македонија
Монтенегро
Россия
Србија
Украина

Asia Pacific

Australia
Brunei
Indonesia
Malaysia
Myanmar
New Zealand
Pakistan
Singapore
Thailand
Việt Nam
Казахстан
Киргизия
ישראל
ایران
中国
日本
대한민국

Americas

Argentina
Bolivien
Brasil
Chile
México
Paraguay
Perú
Trinidad & Tobago
Uruguay

The United States, Canada and Porto Rico

Canada
USA

Africa, Middle East and India

South Africa
Uganda