Liquifast 1599

SKU: P001457
Moisture-curing 1C-PUR. Warm to use windshield adhesive cartridge. High modulus and non-conductive. Prevents contact corrosion on aluminum bodies. OEM quality. Convinces with very high initial strength. For use in conjunction with primer system. Learn More
  • proven OEM quality
  • high-modulus
  • high viscosity
  • non-conductive
  • fast bonding properties
  • Show more
Sources of supply
MSRP As low as
Incl. VAT
ghs08
    Danger
  • H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
  • EUH204 Contains isocyanates. May produce an allergic reaction.
Moisture-curing 1C-PUR. Warm to use windshield adhesive cartridge. High modulus and non-conductive. Prevents contact corrosion on aluminum bodies. OEM quality. Convinces with very high initial strength. For use in conjunction with primer system.
For gluing windshields, rear and side windows on vehicles. Can also be used if the manufacturer requires a high modulus and/or non-conductive pane adhesive, e.g. for glass-integrated antennas and heaters.

Application

1. Preheating
Heat the cartridges in the preheating oven for 30 min. at 50–80 °C. For large panes, we recommend that you preheat a second cartridge as well.

2. Cleaner
The surfaces to be bonded must be dry, free from oil, dust, grease and other dirt residues. The complete pane must be cleaned on the inside with our Windshield Cleaner Foam (part no. 1512). Then clean the bonding surface with Liquiclean (part no. 6186) or Cleaner and Thinner (part no. 6130), as well as the body flange or newly painted body components. We recommend cleaning the cut-back residual adhesive bead with Liquiclean or Cleaner and Thinner as well. Before applying the sealant or bonding the window, the cleaned bonding surface must be completely dry.

Note: To enable optimum adhesion to the body flange, we recommend cleaning the body flange thoroughly before trimming back. Cut back the remaining bead as far as possible.


3. Priming/activation of pre-coated windows
Active Primer is required for adhesive pre-treating during window bonding. The Active Primer is included in the scope of delivery of the Window Repair Kit as a 10 ml stick. Shake Active Primer well for at least 45 seconds before use. Active Primer can be applied universally in the bonding area thinly and evenly (approx. 0.05 mm wet-film thickness) on the cleaned glass surface or ceramic screen printing, on the clean paint surface of newly painted car-body components, on remaining adhesive beadings that have been trimmed back and pre-coated windows (PUR and RIM coatings). The primed surface must be allowed to air off for at least 10 min. (23 °C/ 50 % RH) applying the windshield adhesive. If the remaining adhesive beading was trimmed back more than 6 hours ago, pre-treatment with Active Primer is mandatory.

Recommendations for use are provided in the brochure supplied.

SKU
Informations
Container type
Container contents
Language line
PU
Pallet unit
Container type: Cartridge aluminum
Container contents: 310 ml
Language line: D-GB-P
PU: 12
Pallet unit: 1152

Product Information

Safety data sheets

Images and graphics

Motor oils - Made in Germany

BestBrandLogos
Your Review Your Review
Please enter your name
(Optional)
(Optional)
Please provide a vaild email
Please provide a summary
Please provide a description for the rating

In order to be able to respond to your feedback and improve our service as a result, we will contact you in individual cases, if necessary, with individual queries and always with a request for confirmation of your rating at the e-mail address you provided (Art. 6 (1) lit. f DSGVO).

Your opinion is important to us!

Be a trailblazer and rate the product, so that others can benefit from your experience and we can keep on optimising!
Jane Doe 07.10.2022
Integer aliquam sollictudin tortor, ac pretium risus rutrum at. Curabitur nec iaculis lectus, vitae blandit tellus.
Jane Doe 07.10.2022
Integer aliquam sollictudin tortor, ac pretium risus rutrum at. Curabitur nec iaculis lectus, vitae blandit tellus.
Business customers
Contact our experts now. Find the right contact person in your area.
Private customers
Find suitable dealers in your area. Quick and easy with our supply source search.