Wähle ein anderes Land oder eine andere Region, um Inhalte für deinen Standort zu sehen. Select another country or region to see content for your location. Seleccione otro país o región para ver el contenido de su ubicación. Selecteer een ander land of een andere regio om de inhoud van uw locatie te zien. Vælg et andet land eller område for at se indhold, der er specifikt for din placering. Voit katsoa paikallista sisältöä valitsemalla jonkin toisen maan tai alueen. Choisissez un pays ou une région pour afficher le contenu spécifique à votre emplacement géographique. Επίλεξε μια άλλη χώρα ή περιοχή, για να δεις περιεχόμενο σχετικό με την. Scegli il Paese o territorio in cui sei per vedere i contenuti locali. 別の国または地域を選択して、あなたの場所のコンテンツを表示してください。 Velg et annet land eller region for å se innhold som gjelder der. Escolha para ver conteúdos específicos noutro país ou região. Välj ett annat land eller område för att se det innehåll som finns där. Konumunuza özel içerikleri görmek yapmak için başka bir ülkeyi veya bölgeyi seçin. Chọn quốc gia hoặc khu vực khác để xem nội dung cho địa điểm của bạn

Diese Box wird angezeigt, da die Seitensprache nicht mit einer den Browsersprachen übereinstimmt.

Close




Dual protection with Cera Tec

The optimum wear protection additive for physical and chemical protection

What is Cera Tec and how do I apply it?

Cera Tec is a suspension based on a microceramic solid lubricant and chemical active agents in mineral oil. This is how it is applied:

  • direct addition to the motor or transmission oil (cold or warm) 
  • ideally, pour in together with fresh oil when changing the oil
  • 300 ml is sufficient for up to 5 liters of motor oil
  • the optimal dosage is about 6 % of the total oil fill quantity
  • comply with oil change interval as per the service documents of the vehicle

  • Reduces friction and protects the engine and transmission against wear. 
  • Prevents expensive repairs and prolongs the life of the assemblies.
  • High mechanical and thermal stability, ensuring outstanding lubrication even under the toughest conditions.
  • It saves energy, reduces fuel consumption and thus also pollutant emissions.
  • Cera Tec reacts directly with the surface of the metal and protects your engine for up to 50,000 kilometers. 
  • Cera Tec is self-mixing and compatible with all standard motor oils.
  • Also tested for vehicles with turbochargers, catalytic converters or particle filters.
  • It is ideal for use in oil-lubricated transmissions, pumps and compressors.
  • In new vehicles, CERA TEC supports engine break-in and protects against excessive wear. 
  • With a particle size of only 0.5 µm, it is absolutely compatible with all filters.

Proven efficiency

LIQUI MOLY products stand for reliability, efficiency and for top quality – a performance promise which an independent institute, renowned in the best sense of the word, should put to the test: The Automobil-Prüftechnik-Landau GmbH (APL) tested Cera Tec. 

What was tested

The APL experts determined the relative scuffing load capacity of lubrication oils. Between the edges of the teeth, rolling off and sliding occur at the same time. Due to unfavorable operating conditions the lubricant film can break down between the tooth edges. This leads to short-term local fusion and disintegration of the edges, so-called scuffing, which causes damage to the smooth surface of the teeth edges. Possible consequences: higher engine and transmission noise until failure of the gear wheels occurs. 

Test sequence

On the vehicle distortion test bench the test oil was mixed with 6 per cent Cera Tec. With each test sequence the weight, and thereby the force level, on the sensitive transmission gear wheels was increased. The aim of the experiment is to reach the damage force level. This level is reached when the sum of all damage caused to the teeth of the gear wheels is more than 20 millimeters. The test is then ended. The reference oil came up to damage force level 4; the oil mixed with Cera Tec reached as far as level 9, hence to more than double the level. «Cera Tec markedly increases the power reserve, which confirms the anti-wear protection by the fine ceramic particles,» is how Dipl.-Ing. Peter Kunz, who supervised the test, summarizes the results. Kunz’s initial skepticism gave way: After the tests I was amazed. The product has made everything, and I really mean everything, better.»

Just the demand for APL’s expertise alone has been unusual. «LIQUI MOLY is the first company in the after-sales market that has been prepared to undergo voluntary tests», said Kunz. He is responsible for the testing of lubricants and fuels.

This is APL

Formed in 1989, APL is a neutral and independent, internationally renowned development service provider, working for a worldwide client base from the automobile, oil and additives industries. The company is specialized in the mechanics of engine and drive trains and their operating supplies. On nearly 145 state of the art engine and component test rigs, more than 700 employees apply the latest measurement technology

In short

Cera Tec reduces the amount of friction and thereby the wear. This in turn benefits the engine, which is under less load. This can result in a lower susceptibility to repair and longer service life.
 

To the product 


Europe

Bosna i Hercegovina
Czechia
Danmark
Deutschland
Eesti
España
France
Great Britain
Hrvatska
Ireland
Italia
Kosovë
Latvija
Lietuva
Magyarország
Nederland
Norge
Österreich
Polska
Portugal
Schweiz
Slovensko
Srbija
Suomi
Sverige
Türkiye
Ελλάδα
Македонија
Монтенегро
Россия
Србија
Украина

Asia Pacific

Australia
Brunei
Indonesia
Malaysia
Myanmar
New Zealand
Pakistan
Singapore
Thailand
Việt Nam
Казахстан
Киргизия
ישראל
ایران
中国
日本
대한민국

Americas

Argentina
Bolivien
Brasil
Chile
México
Paraguay
Perú
Trinidad & Tobago
Uruguay

The United States, Canada and Porto Rico

Canada
USA

Africa, Middle East and India

South Africa
Uganda