Storage solutions

Material: Steel sheet powder-coated in anthracite or aluminum- silver look, 3 shelves, drip tray in galvanized sheet steel, brochure compartment in the right-hand door. Doors are lockable.
Weight: 116 kg
Dimensions (H x W x D): 2,100 x 950 x 550 mm

The cabinet is delivered as complete, assembled unit.

The right oil for each vehicle – all oil specialties cleanly and orderly arranged in the LIQUI MOLY oil cabinet!

• Specially developed for the new LIQUI MOLY 20-liter canister.
• You can therefore store smaller quantities of high-value special oils as a rule.
• Offset shelves prevent drops falling onto the lower levels.
• Integrated oil drip tray so that there are no problems with the authorities.
• Lockable, i. e. no more ”oil loss”!
• Document compartments integrated into the door, e. g. for technical data sheets.
• Capacity 8 x 20 l-canister and 2 x 60 l-drum. Alternative 12 x 20 l-canister.

Weight: 52 kg
Dimensions (H x W x D): 950 x 630 x 550 mm

• The LIQUI MOLY gear oil cabinet is an in-house development and is produced exclusively for LIQUI MOLY clients.
• The body, doors and internal dividers are made of high-quality, powder-coated sheet steel, in aluminum-silver or anthracite color.
• The cabinet also has a pull-out oil drip tray, three drain cocks, holder for a hand-operated metering syringe (Part no. 7989) and two storage compartments for extra labels, oil guide, etc. on the inside of the right-hand door.
• Holes and reinforcement plates in the rear panel for wall fixing.

Following content is possible:

• 3 x 20-liter canisters, 3 x 6-pack units of the 1-liter gear oil bottle Optional: 1.000 ml manual metering syringe in the holder provided (Part no. 7989).

Weight: 52 kg
Dimensions (H x W x D): 950 x 630 x 550 mm

• The Motorbike oil cabinet was specially developed for 20-liter and 1-liter LIQUI MOLY containers.
• Robust design in powder-coated sheet steel for wall mounting.
• Ideal for safekeeping of Motorbike motor and transmission oils.
• With built-in oil drip tray and document compartment for technical information sheets.

Following content is possible:

• 3 x 20-liter canisters, 3 x 6-packaging units of 1 liter motorcycle oil canisters (as desired)

Weight: each 23.5 kg
Dimensions (H x W x D): 950 x 450 x 320 mm
For optimum storage of chemical products.

Steel cabinets especially developed by LIQUI MOLY; extremely stable version. Ideal for professional use in workshops with practical subdivisions. All cabinets are already prepared for wall installation. Doors can be secured with bale lock to prevent “disappearance”. All three cabinets are available separately.

Service product cabinet
When aerosol cans are overheated from exposure to sun or fire, for example, the danger exists of the aerosol cans bursting. In addition to the hazard posed by parts of the spray can, other highly combustible substances are released, which can lead to aggravation of the fire or even explosion. For this reason it is practical in every day practice in workshops to store used aerosol cans in the LIQUI MOLY service product cabinet to counteract such hazards.

Adhesives and sealants cabinet
Adhesives, sealants and other chemical products for corrosion protection and car glass service can be stored safely and neatly in this cabinet.

Additive cabinet
For storing Pro-Line Series LIQUI MOLY additives used in the workshop.